Installation Instructions
9INSTALL CENTER HINGE PIN
AInstall the center hinge pin.
NOTE: On models with a freezer door, be sure to put the washer between the top of the freezer door and the bottom of the center hinge.
Freezer Door Models | Freezer Drawer Models |
10TRANSFER REFRIGERATOR DOOR STOP
ARemove the door stop on right side of the bottom of the refrigerator door by removing the two screws.
BMove the plastic hinge hole thimble to the opposite hole.
CInstall the door stop on the left side, making sure to line up the screw holes in the door stop with the holes in the bottom of the door.
A
Bottom of |
| Bottom of |
Refrigerator Door |
| Refrigerator Door |
(Right Side) |
| (Left Side) |
|
|
|
11TRANSFER REFRIGERATOR DOOR HANDLE TO RIGHT
Refer to Remove the Fresh Food Door Handle and Attach the Fresh Food Door Handle sections for instructions.
12
A
B
C
REHANG REFRIGERATOR DOOR
Lower the refrigerator door onto the center hinge pin.
Insert the top hinge pin into the hinge hole on top of the refrigerator door. Make sure the door is aligned with the cabinet. Attach the hinge to the top of the cabinet loosely with the bolts.
Make sure the gasket on the door is flush against the cabinet and is not folded. Support the door on the handle side and make sure the door is straight and the gap between the doors is even across the front. While holding the door in place, tighten the top hinge screws. Replace the hinge cover.
27
