Installation Instructions

REPLACING THE FREEZER DRAWER (on some models)

Two people may be required to complete this procedure.

1ATTACH AND SECURE THE DRAWER FRONT TO THE SLIDES

APull out the rail assemblies to the full length on each side of the cabinet.

BLocate the slots on the inside of the rail assemblies near the back.

Slot

Rail assembly

CInsert the hooks at the back of the drawer railings into the slots on the rail assemblies.

DLower the front of the drawer, making sure the tabs on the sides of the railings fit into the front slots in the rail assemblies.

1ATTACH AND SECURE THE DRAWER FRONT TO THE SLIDES

(cont.)

EReplace the Phillips head screws on both rail assemblies.

Phillips

Screw

2REPLACE THE FREEZER BASKET

Replace the lower freezer basket by lowering it into the frame.

Hook

Slot

Tab

23

Page 23
Image 23
GE Monogram 20, 22 operating instructions Replace the Freezer Basket, Attach and Secure the Drawer Front to the Slides, Cont