INTRODUCTION
Thank you for purchasing this model of the stationary emergency generator set product line by Generac Power Systems, Inc"
Every effort was expended to make sure that the information and instructions in this manual were both accurate and current at the time the manual was written. However, the manufacturer reserves the right to change, alter or otherwise improve this product(s) at any time without prior notice.
READ THIS MANUAL THOROUGHLY
If any portion of this manual is not understood, contact the near- est Authorized Service Dealer for starting, operating and servicing procedures.
Throughout this publication, and on tags and decals affixed to the generator, DANGER, WARNING, CAUTION and NOTE blocks are used to alert personnel to special instructions about a particular service or operation that may be hazardous if performed incor- rectly or carelessly. Observe them carefully. Their definitions are as follows:
~
INDICATES AHAZARDOUS SITUATION OR ACTION WHICH, IF NOT AVOIDED, WILL RESULT IN DEATH OR SERIOUS INJURY.
IAWARNING!I
Indicates a hazardous situation or action which, if not
avoided, could result in death or serious injury.
ACAUTIONI
Indicates a hazardous situation or action which, if not avoided, could result in minor or moderate injury.
NOTE:
Notes contain additional information important to a procedure and will be found within the regular text body of this manual.
These safety warnings cannot eliminate the hazards that they indicate. Common sense and strict compliance with the special instructions while performing the action or service are essential to preventing accidents.
Four commonly used safety symbols accompany the DANGER, WARNING and CAUTION blocks. The type of information each indicates is as follows:
A This symbol points out important safety information that,
.... if not followed, could endanger personal safety and/or
property of others.
A This symbol points out potential explosion hazard.
£This symbol points out potential fire hazard.
LhThis symbol points out potential electrical shock hazard.
Introduction
The operator is responsible for proper and safe use of the equip- ment. The manufacturer strongly recommends that the operator read this Owner'sManual and thoroughly understand all instruc- tions before using this equipment. The manufacturer also strongly recommends instructing other users to properly start and operate the unit. This prepares them if they need to operate the equipment in an emergency.
OPERATION AND MAINTENANCE
It is the operator'sresponsibility to perform all safety checks, to make sure that all maintenance for safe operation is performed promptly, and to have the equipment checked periodically by an Authorized Service Dealer. Normal maintenance service and replacement of parts are the responsibility of the owner/operator and, as such, are not considered defects in materials or workman- ship within the terms of the warranty. Individual operating habits and usage contribute to the need for maintenance service.
Proper maintenance and care of the generator ensure a minimum number of problems and keep operating expenses at a minimum. See an Authorized Service Dealer for service aids and acces- sories.
Operating instructions presented in this manual assume that the stationary emergency electric system has been installed by an Authorized Service Dealer or other competent, qualified contractor. Installation of this equipment is not a
HOW TO OBTAIN SERVICE
When the generator requires servicing or repairs, contact an Authorized Service Dealer for assistance. Service technicians are
When contacting an Authorized Service Dealer about parts and service, always supply the complete model number of the unit as given on the front cover of this manual or on the DATA LABEL affixed to the unit.
AUTHORIZED SERVICE
DEALER LOCATION
To locate the nearest AUTHORIZED SERVICE
DEALER, please call this number:
1·800·333·1322
DEALER LOCATION INFORMATION CAN BE OBTAINED AT THIS NUMBER or visit the website at
www.generac.com.
