EXPLODED VIEW:
DRAWING #:OH8060
APPLICABLE TO:
GROUPH
ITEM | PART# | QTY. | DESCRIPTION |
1 | 057148A | 2 | BATIERY WARMER 36" 80W 120V |
2 | 022206 | 1 | FITIING CONDUIT STR 3/8 |
3 | OG5704 | 1 | DECAL BATIWARMER CONNECTION |
Battery Heater Connection
1.Disconnect battery cables to prevent accidental
2.Make sure power is off from the appropriate power source.
3.To connect the wires, hold the bare metal leads together and place awire nut over them, then twist clockwise until tight. For all these connections, use the wires nuts provided.
4.Connect the ground wire from 120V power source to the ground wire from battery heater.
5.Using wire nuts provided connect the white wire and black wire from the battery heater as follows:
•The white (common) power wire from 120V power source to 1st wire from the battery heater.
•The wire from load side of themnostat to 2nd wire from the battery heater.
CAUTION: Be sure no bare wire or wire strands are visible after making connections.
6.Push all wires and wire nuts into junction box.
7.Assemble junction box cover to junction box.
8.Reconnect battery cables to battery posts. Connect the positive cable first to the battery post indicated by (+) or POS.
DATE 3/4/10
PAGE 2 OF 2
