Generac Power Systems 941-2, 940-2 service manual Part, Specifications & Charts, Model

			Part 8
		SPECIFICATIONS & CHARTS
	OIL PUMP (CONTINUED)
MODEL		GV-220
OIL PRESSURE RELIEF
VALVE SPRING: Force
required to compress		0.85-0.95 pounds
spring to 1.035 inch		(0.39-0.43kg)
(26.3mm)
	COMPRESSION PRESSURE
MODEL		GV-220
WHILE CRANKING
(COLD ENGINE)		60 psi min.
	TORQUE SPECIFICATIONS
MODEL		GV-220
Rocker Cover Screws		4 ft-lbs	(48 in-lbs)
Rocker Arm Jam Nut		14.5 ft-lbs (174 in-lbs)
Cylinder Head Bolts		22 ft-lbs	(264 in-lbs)
Connecting Rod Bolts		10 ft-lbs	(120 in-lbs)
Flywheel Nut		75 ft-lbs	(900 in-lbs)
Crankcase Cover Bolts		18 ft-lbs	(216 in-lbs)
Ignition Coil Bolts		5 ft-lbs	(60 in-lbs)
Spark Plug		13 ft-lbs	(156 in-lbs)
Rewind Starter Screws		5 ft-lbs	(60 in-lbs)
Starter Motor Bolts		18 ft-lbs	(216 in-lbs)
Intake Manifold Screws		4 ft-lbs	(50 in-lbs)
Carburetor to Intake
Manifold		3.3 ft-lbs (40 in-lbs)
Air Cleaner Box
(to Carburetor)		4 ft-lbs	(50 in-lbs)
Blower Housing Screws		7 ft-lbs	(84 in-lbs)
Upper and Lower Shroud
Screws		4 ft-lbs	(48 in-lbs)
Governor Lever Clamp
Bolt		5.8 ft-lbs (70 in-lbs)
Oil Filter Adapter Bolts		9 ft-lbs (108 in-lbs)
Low Oil Switch		9 ft-lbs (108 in-lbs)

Page 8-9