Gigabyte GA-EP45-UD3LR Integrated Peripherals, SATA RAID/AHCI Mode Intel ICH10R Southbridge, Ahci

2-6	Integrated Peripherals
		CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
			Integrated Peripherals
	SATA RAID/AHCI Mode 		[Disabled]			Item Help
	SATA AHCI Mode 		[Disabled]		Menu Level
	SATA Port0-3 Native Mode		[Disabled]
	USB Controller		[Enabled]
	USB 2.0 Controller		[Enabled]
	USB Keyboard Support		[Enabled]
	USB Mouse Support		[Disabled]
	Legacy USB storage detect		[Enabled]
	Azalia Codec		[Auto]
	Onboard H/W LAN		[Enabled]
	Green LAN		[Disbabled]
	SMART LAN		[Press Enter]
	Onboard LAN Boot ROM		[Disabled]
	Onboard IDE Controller		[Enabled]
	Onboard Serial Port 1		[3F8/IRQ4]
	Onboard Parallel Port		[378/IRQ7]
	Parallel Port Mode		[SPP]
: Move		Enter: Select	+/-/PU/PD: Value	F10: Save	ESC: Exit	F1: General Help
	F5: Previous Values		F6: Fail-Safe Default		F7: Optimized Defaults
	SATA RAID/AHCI Mode (Intel ICH10R Southbridge)
	Enables or disables RAID for the SATA controllers integrated in the Intel ICH10R Southbridge or
	configures the SATA controllers to AHCI mode.
	Disabled	Disables RAID for the SATA controllers and configures the SATA controllers to PATA mode. (Default)
	AHCI	Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface
		(AHCI) is an interface specification that allows the storage driver to enable advanced
		Serial ATA features such as Native Command Queuing and hot plug.
	RAID	Enables RAID for the SATA controllers.
	SATA AHCI Mode (Intel ICH10 Southbridge)
	Configures the SATA controllers integrated in the Intel ICH10 Southbridge to AHCI mode.
	Disabled	Disables AHCI for the SATA controllers and configures the SATA controllers to PATA mode. (Default)
	AHCI (Note)	Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface
		(AHCI) is an interface specification that allows the storage driver to enable
		advanced Serial ATA features such as Native Command Queuing and hot plug.
	SATA Port0-3 Native Mode
	Specifies the operating mode of the integrated SATA controllers.
	Disabled	Allows the SATA controllers to operate in Legacy IDE mode.
		In Legacy mode the SATA controllers use dedicated IRQs that cannot be shared
		with other device. Set this option to Disabled if you wish to install operating
		systems that do not support Native mode. (Default)
	Enabled	Allows the SATA controllers to operate in Native IDE mode.
		Enable Native IDE mode if you wish to install operating systems that support
		Native mode.

Only for GA-EP45-UD3LR.

Only for GA-EP45-UD3L.

GA-EP45-UD3LR/UD3L Motherboard - 50 -