Gigabyte GA-EP45-UD3LR user manual

Copying the SATA RAID/AHCI driver from the motherboard driver disk to a USB flash drive

Step 1:

On an alternative system, copy the SATA RAID/AHCI driver to your USB flash drive from the motherboard driver disk. For example, to install the Windows Vista 32-bit operating system(Note) on the Intel ICH10R SATA controller, copy the MSM32 file (Figure 4) located in the BootDrv folder in the motherboard driver disk to your USB flash drive.

Figure 4

Step 2:

Double-click the MSM32 file in the USB flash drive. When a screen similar to that in Figure 5 appears, type "yes" after the "Continue extraction?" message, and then press <Enter> to begin extracting the driver. After the driver is extracted, a screen similar to that in Figure 6 will appear.

Figure 5

Figure 6

(Note) To install the Windows Vista 64-bit operating system, please copy the MSM64 file.

GA-EP45-UD3LR/UD3L Motherboard - 86 -