Gigabyte GA-EP45-UD3LR user manual Date, Time, IDE Channel 0, 1 Master/Slave

2-4	Standard CMOS Features
		CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
			Standard CMOS Features
	Date (mm:dd:yy)		Mon, Sep	8 2008			Item Help
	Time (hh:mm:ss)		22:31:24			Menu Level
 IDE Channel 0 Master			[None]
 IDE Channel 0 Slave			[None]
 IDE Channel 1 Master			[None]
 IDE Channel 1 Slave			[None]
 IDE Channel 2 Master			[None]
 IDE Channel 3 Master			[None]
 IDE Channel 4 Master			[None]
 IDE Channel 4 Slave			[None]
	Drive A		[1.44M, 3.5"]
	Floppy 3 Mode Support		[Disabled]
	Halt On		[All, But Keyboard]
	Base Memory		640K
	Extended Memory		510M
: Move		Enter: Select	+/-/PU/PD: Value	F10: Save	ESC: Exit		F1: General Help
	F5: Previous Values		F6: Fail-Safe Defaults		F7: Optimized Defaults

CMOS Setup Utility-Copyright (C) 1984-2008 Award Software

Standard CMOS Features

Total Memory 512M

Item Help

Menu Level

: Move	Enter: Select	+/-/PU/PD: Value	F10: Save	ESC: Exit	F1: General Help
F5: Previous Values		F6: Fail-Safe Defaults		F7: Optimized Defaults

Date

Sets the system date. The date format is week (read-only), month, date and year . Select the desired field and use the up arrow or down arrow key to set the date.

Time

Sets the system time. For example, 1 p.m. is 13:0:0. Select the desired field and use the up arrow or down arrow key to set the time.

IDE Channel 0, 1 Master/Slave

IDE HDD Auto-Detection

Press <Enter> to autodetect the parameters of the IDE/SATA device on this channel. IDE Channel 0, 1 Master/Slave

Configure your IDE/SATA devices by using one of the three methods below:
- 45 -	BIOS Setup