...continued
AUDIO
RETURN
SELECT EVENT
1 | 10:30 PM | On Wednesdays | |
| Ch10 | 1H30M | Auto |
2 | - | - - - | - - |
| Ch - - | - H - - M | - - |
3 | - | - - - | - - |
| Ch - - | - H - - M | - - |
4 | - | - - - | - - |
| Ch - - | - H - - M | - - |
| / To Move |
| To Select |
1 0 V I E W E V E N T S U M M A R Y
Press RETURN to confirm the event and view a summary of all programmed events.
¥The event is now stored in memory and will record at the scheduled time. It is not necessary to turn the DVD+VCR off or put it into a ÒTimerÓ mode; the event will record regardless of the state of the DVD+VCR.
¥The ÒTimerÓ indicator will light on the front panel display. If there is a timer recording error, the ÒTimerÓ indicator will blink and an error message will appear on the screen (see ÒTimer Re- cording ErrorsÓbelow).
¥To program another event, select any available event number.
¥To edit an event, select its event num- ber.
¥To delete an event, use the UP/DOWN arrow keys to select it, then press
CLEAR.
¥To exit the Select Event screen, press
SETUP/ENTER.
T I M E R R E C O R D I N G E
T I M E R R E C O R D I N G E R R O R S
Ta p e M i s s i n g | O v e r l a p p i n g E v e n t s | |||
Solution: Insert a tape in the VCR | Solution: If two programmed events | |||
deck. | overlap, you will be prompted to | |||
Ta p e M i s s i n g Ta b | either delete one of the events, or | |||
Solution: Insert a tape with a record | allow them to overlap. If you allow | |||
safety tab. | them to overlap, the event with the | |||
N o t R e a d y | earliest starting time will be com- | |||
pletely recorded, then the remainder | ||||
Solution: The VCR deck is already in | ||||
of the event with the next earliest | ||||
use. Press STOP |
| on this deck. | ||
| starting time will be recorded. | |||
|
|
| ||
|
|
|
| |
R R O R S
N O T E
•Complete Program Record (CPR) adjusts the record speed to make sure the tape does not run out before the Timer Recording is complete. With Record Speed set to “Auto,” the DVD+VCR will begin recording in SP. It will then calculate how much time is remaining on the tape and adjust the record speed to SLP if necessary. If there is not enough room to record the entire show, the DVD+VCR will record in SLP until the end of the tape is reached.
6 - Timer Recording
27 |
