31
Basic Setup Getting
Started
DVD
Recording
DVD
Playback
Advanced
Settings
Help
Chapter 4 DVD Playback:: Basic Disc Playback

Playing a DVD

Before you begin:
• Turn on the DVD player using the front panel Power button. If the unit is in Standby mode, press On/Standby on the remote control to power
on the unit. The green Power indicator will glow on the front panel display.
• Turn on your TV, and set it to the video input connected to the DVD player.
• Turn on your audio system (if using an external amplifier/audio system), and set it to the input connected to the DVD player.
1Press Open/Close on the remote control or front panel to open the disc drawer.
2Place the disc in the drawer with the label side facing up and playback side facing down. If the disc has two sides, place the disc with the
desired playback side facing down.
3Press Open/Close again to close the disc drawer.
4Press Play /Enter on the remote control or front panel.
• Many discs will load and begin playin g automatically when the disc drawer closes. Most rental DVDs have disc menus to aid in naviga-
tion; see “Disc Menu Navigation” on page 33.
• If the disc is a DV D+R/+RW, the disc menu will appear; see “About R6530 Disc Menus” on page32.
• If the disc is scratched, dirty, or not encoded for Region 1, you will receive an error message and the disc will not play.
• Always press Stop to stop playback of a disc before powering off the player.