•If this is the first time you have entered the password, you will be prompted to enter it again to confirm.
•Use the / buttons to select the desired rating (from
•Press Play /Enter to confirm your selection.
Password
Sets or changes the password for the Ratings feature:
•Use the / buttons to select Password and press Play /Enter.
•Enter a
•You will be prompted to enter the password again to confirm.
Screen Saver
Enables or disables Screen Saver:
•Use the / buttons to select Screen Saver and press Play / Enter.
•Use the / buttons to select On or Off.
•If you select On, the DVD+RW icon will appear whenever the unit is left alone for several minutes to protect your TV screen.
Angle Mark
Enables or disables Angle Marks during DVD playback:
•Use the / buttons to select Angle Mark and press Play / Enter.
•Use the / buttons to select On or Off.
•If you select On, a camera icon will appear on screen whenever an alternative angle is available during DVD playback.
Factory Reset
Resets all Setup menu options to their original settings.
•Use the / buttons to select Factory Reset.
•Use the / buttons to select Confirm or Cancel. If you select Confirm all custom settings will be lost and the DVD Recorder will restart in Initial Setup mode, see page 14.
:: Disc Media Settings
Use to finalize a DVD+R disc or erase a DVD+RW disc. Only avail- able when a DVD+R/+RW is loaded.
1Press Setup.
2Use the / buttons to select Disc Media and press Play / Enter.
Disc Media Menu
3Choose from the following:
Finalize DVD+R
Finalizes a DVD+R disc so it will play in most DVD players.
•Use the / buttons to select Finalize.
•Use the / buttons to select Confirm (or Cancel). If you select Confirm, the DVD+R will be closed to further recording and will be compatible with most DVD players.
Erase DVD+RW
Erases a DVD+RW disc so it can be recorded over again.
•Use the / buttons to select Erase.
•Use the / buttons to select Confirm (or Cancel). If you select Confirm, the DVD+RW will be erased.
43
Advanced DVDDVD Basic Setup Getting Settings Playback RecordingStarted
Help