Setup
12.Ground system
a.Reactor: is grounded through power cord. See page 18.
b.Spray gun: connect whip hose ground wire to FTS, page 19. Do not disconnect wire or spray without whip hose.
c.Fluid supply containers: follow your local code.
d.Object being sprayed: follow your local code.
e.Solvent pails used when flushing: follow your local code. Use only metal pails, which are con- ductive, placed on a grounded surface. Do not place pail on a nonconductive surface, such as paper or cardboard, which interrupts grounding continuity
f.To maintain grounding continuity when flushing or relieving pressure, hold a metal part of spray gun firmly to the side of a grounded metal pail, then trigger gun.
13.Check hydraulic fluid level
a.Hydraulic reservoir is filled at the factory. Check fluid level before operating the first time, and weekly thereafter. See Maintenance, page 36.
313539F | 21 |
