Graco PR70 important safety instructions Miscellaneous Mechanical Assemblies, To Replace the Fuses

Miscellaneous Assemblies

Miscellaneous Mechanical Assemblies

Figure 54: PR70 Power Entry Bracket Assembly (LC0106)

Key:

Ref	P/N	Description	QTY	Ref	P/N	Description	QTY
1	119912	SCREW, PAN, M3X6, PHILLIPS, SS	3	11	84/0130-26/11	LABEL, PE	1
2	121018	ELBOW, SWVL, 3/8 X ¼ NPT, FXM, 90DE	1	12	LC0034	HARNESS, WIRE, REMOTE SIGNAL	1
3	120876	PWR SUPPLY, 24VDC, 40W, 100-240VAC IN	1	13	121178	VALVE, LOCKOUT, ¼ NPT	1
4	120882	FILTER, 1/4NPT	1	14	121179	QUIKCLAMP, ¼ NPT	2
5	120883	NUT, HEX, 7/8-14, MS	1	15	121180	MULTIPORT, [3] ¼ NPT	1
6	120910	PWR ENTRY, 120/240VAC, DUAL FUSE, EMI	1	16	94/0762/99	VALVE, RELIEF, ¼ NPT, M, 110PSI, SIL	1
7	120916	SCREW,FHSC, M3X0.5 X 10, SS	2	17	94/0430/99	PLUG, SKT HD, ¼ NPT, MS	2
8	120993	NUT, HEX, M5X0.8, WITH STAR WASHER	2	18	81/1054-4/11	FUSE 5X20MM, 4AMP, FAST, TYPE F, 250VAC	2
9	15K798	BRACKET, SWITCH, AIR	1	19	LC0031	CABLE ASSY, POWER IN	1
10	15K800	FITTING, BULKHEAD	1

To Replace the Fuses:

1.Remove the machine fuse holder from the PWR Entry module (6) by inserting a flat-head screwdriver between the holder and the back the PWR Entry module (The fuse holder is above where AC power is connected to the machine).

2.Replace the blown fuse(s) (18) into the fuse holder.

3.Re-install the holder into the PWR Entry Module.

312393G 43 of 50