INTRODUCTION

Please register your AVR 2600 at

www.harmankardon.com.

NOTE: You’ll need the product’s serial number. At the same time, you can choose to be notified about new products and/or special promotions.

Thank you for choosing a Harman Kardon® product!

For more than fifty years, the Harman Kardon® mission has been to share a passion for music and entertainment, using leading-edge technology to achieve premium performance. Harman Kardon, Inc., invented the receiver, a single component designed to simplify home entertainment without compromising performance. Over the years, Harman Kardon products have become easier to use, while offering more features and sounding better than ever. The AVR 2600 multizone 7.1-channel digital audio/video receiver contin- ues this tradition with some of the most advanced audio and video processing capabilities yet, and a wealth of listening and viewing options.

To obtain the maximum enjoyment from your new receiver, please read this manual and refer back to it as you become more familiar with its features and their operation.

If you have any questions about this product, its installation or its operation, please contact your Harman Kardon retailer or custom installer, or visit the Web site at www.harmankardon.com.

Harman Kardon AVR 2600 7.1-Channel Audio/Video Receiver

Audio Section

•65 Watts x 7, seven channels driven at full power at 8 ohms, 20Hz – 20kHz, <0.07% THD, 455 watts total

•High-current capability, ultrawide-bandwidth amplifier design with low negative feedback

•All-discrete amplifier circuitry

•Quadruple-crossover bass management

•Dual 32-bit Cirrus Logic ® DSP processor

•192kHz/24-bit A/D and D/A conversion

•Sampling upconversion to 96kHz

•Dolby® Volume processing

Surround Modes

•Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD

•Dolby Pro Logic® II and IIx (Movie, Music and Game), up to 96kHz

•Harman Virtual Speaker

•Harman Headphone

•DTS-HD High Resolution Audio™, DTS-HD Master Audio™

•DTS® (5.1; DTS Stereo; DTS-ES®6.1 Discrete and Matrix)

•DTS 96/24™ (DTS Stereo)

•DTS Neo:6® (Cinema 5-, 6- or 7-channel; Music 5-, 6- or 7-channel), up to 96kHz

•Logic 7® (Movie, Music and Game), up to 96kHz

•5- or 7-Channel Stereo, up to 96kHz

•Surround Off (DSP or Analog Bypass)

ENGLISH

5

Page 4 Page 6
Page 5
Image 5
Harman 2600 owner manual Introduction, Surround Modes, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD
Page 4 Page 6

2600 specifications

The Harman 2600 is a remarkable audio amplifier that has captured the attention of audiophiles and sound enthusiasts alike. As part of Harman's legacy of delivering high-quality sound solutions, the 2600 model combines advanced technologies and innovative features to ensure a superior listening experience.

One of the standout features of the Harman 2600 is its high power output. With the capability to deliver 260 watts per channel at 4 ohms, the amplifier is designed to drive even the most demanding speakers effortlessly. This power ensures that listeners can enjoy a full-bodied sound with deep bass and crystal-clear highs. The amplifier also supports a wide frequency response range, allowing it to reproduce every nuance of music with remarkable accuracy.

Incorporating Harman's proprietary technologies further enhances the performance of the 2600. The amplifier utilizes advanced Class D amplification technology, which not only improves efficiency but also minimizes heat generation. This technology allows for a compact design without compromising sound quality. The result is an amplifier that can run for extended periods without overheating, making it ideal for long listening sessions or intense audio experiences.

The Harman 2600 features multiple input options, including balanced XLR and unbalanced RCA connections, which provide flexibility when integrating into a home audio system. This versatility is complemented by a robust built-in digital signal processor (DSP) that allows users to customize equalization and sound profiles according to their preferences. The DSP ensures that the Harman 2600 can adapt to various acoustic environments, delivering optimal sound in any setting.

Another notable characteristic of the Harman 2600 is its build quality. Constructed with high-grade components, the amplifier is designed to withstand the test of time while maintaining consistent performance. The elegant design features an aluminum front panel and a well-ventilated chassis, offering both aesthetic appeal and functional efficiency.

Additionally, the amplifier includes protection circuits to safeguard against short circuits, overheating, and overloading, ensuring both user safety and product longevity. In conclusion, with its impressive power, advanced technologies, versatile inputs, and premium build quality, the Harman 2600 stands out as a premier choice for audio enthusiasts seeking a powerful and reliable amplifier for their sound systems. Whether for casual listening or critical playback, the Harman 2600 delivers an exceptional audio experience.
Top Page Image Contents