AVR 2600 TECHNICAL SPECIFICATIONS

Audio Section

Stereo Mode, Continuous Average Power (FTC)

65 Watts per channel, 20Hz–20kHz, @ <0.07% THD, both channels driven into 8 ohms

Seven-Channel Surround Modes

Power per Individual Channel

Front L & R channels:

65 Watts per channel

@ <0.07% THD, 20Hz–20kHz into 8 ohms

Center channel:

65 Watts @ <0.07% THD, 20Hz–20kHz into 8 ohms

Surround (L & R Side, L & R Back) channels: 65 Watts per channel

@ <0.07% THD, 20Hz–20kHz into 8 ohms

Input Sensitivity/Impedance

 

Linear (High-Level)

200mV/47k ohms

Signal-to-Noise Ratio (IHF-A)

100dB

Surround System Adjacent Channel Separation

Pro Logic® II

40dB

Dolby® Digital (AC-3)

55dB

DTS®

55dB

Frequency Response

 

@ 1W (+0dB, –3dB)

10Hz – 130kHz

High Instantaneous

 

Current Capability (HCC)

±60 Amps

Transient Intermodulation

 

Distortion (TIM)

Unmeasurable

Slew Rate

40V/µsec

FM Tuner Section

 

Frequency Range

87.5 –108.0MHz

Usable Sensitivity

IHF 1.3µV/13.2dBf

Signal-to-Noise Ratio

Mono/Stereo 70/68dB

Distortion

Mono/Stereo 0.2/0.3%

Stereo Separation

40dB @ 1kHz

Selectivity

±400kHz, 70dB

Image Rejection

80dB

IF Rejection

90dB

Video Section

 

 

Television Format

NTSC

 

Input Level/Impedance

1Vp-p/75 ohms

 

Output Level/Impedance

1Vp-p/75 ohms

 

Video Frequency Response

 

 

(Composite and S-Video)

10Hz–8MHz (–3dB)

 

Video Frequency Response

 

 

(Component Video)

10Hz–100MHz (–3dB)

 

HDMI

Version 1.3a with 10-bit Deep Color

General

 

 

Power Requirement

AC 120V/60Hz

 

Power Consumption

540W maximum

 

 

(7 channels driven)

 

Stand-by consumption

<1W

 

Dimensions

(Product)

(Shipping)

Width

17-5/16 inches (440mm)

18-5/16 inches (555mm)

Height

6-1/2 inches (165mm)

10-1/2 inches (266mm)

Depth

17-1/16 inches (382mm)

21-7/8 inches (465mm)

 

(Product)

(Shipping)

Weight

24.4 lb (11.1kg)

29 lb (13.2kg)

Depth measurement includes knobs, buttons and terminal connections. Height measurement includes feet and chassis.

Features, specifications and appearance are subject to change without notice.

Harman Kardon and Logic 7 are trademarks of Harman International Industries, Incorporated, registered in the United States and/or other countries. EzSet/EQ, Designed to Entertain and The Bridge III logo are trademarks of Harman International Industries, Incorporated.

Blu-ray Disc is a trademark of the Blu-ray Disc Association.

CEA is a registered trademark of the Consumer Electronics Association.

Cirrus Logic is a registered trademark of Cirrus Logic, Inc.

Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double–D symbol are registered trademarks of Dolby Laboratories.

Manufactured under license under U.S. Patent #'s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 and other U.S. and worldwide patents issued and pending. DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and DTS-HD Master Audio are trademarks of DTS, Inc. (c) 1996-2008 DTS, Inc.

All Rights Reserved.

Faroudja DCDi Cinema is a trademark of Genesis Microchip Inc.

HD-DVD is a trademark of the DVD Format/Logo Licensing Corporation (DVD FLLC).

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

AM Tuner Section

 

Frequency Range

520–1710kHz

Signal-to-Noise Ratio

45dB

Usable Sensitivity

Loop 500µV

Distortion

1kHz, 50% Mod 0.8%

Selectivity

±10kHz, 30dB

Please register your AVR 2600 at www.harmankardon.com. You’ll need the product’s serial number. At the same time, you can choose to be notified about new products and/or special promotions.

iPod, iTunes, Apple, iPod touch, iPod classic and iPod nano are trademarks of Apple Inc., registered in the U.S. and other countries. iPhone is a trademark of Apple Inc. iPod and iPhone not included.

SACD is a trademark of Sony Corporation.

SIRIUS and all related marks and logos are trademarks of Sirius XM Radio Inc. and its subsidiaries. All other marks and logos are the property of their respective owners. All rights reserved. SIRIUS subscription sold separately. Taxes and a one-time activation fee may apply. SIRIUS tuner required (sold separately) to receive the SIRIUS service. All programming and fees subject to change. It is prohibited to copy, decompile, disassemble, reverse engineer, hack, manipulate or otherwise make available any technology or software incorporated in receivers compatible with the SIRIUS Satellite Radio System. Service not available in Alaska or Hawaii.

TiVo is a registered trademark of TiVo Inc.

This product incorporates copyright protection technology that is protected by method claims of cer- tain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only unless otherwise author- ized by Macrovision Corporation. Reverse engineering or diassembly is prohibited.

62

Page 62
Image 62
Harman owner manual AVR 2600 Technical Specifications, Audio Section

2600 specifications

The Harman 2600 is a remarkable audio amplifier that has captured the attention of audiophiles and sound enthusiasts alike. As part of Harman's legacy of delivering high-quality sound solutions, the 2600 model combines advanced technologies and innovative features to ensure a superior listening experience.

One of the standout features of the Harman 2600 is its high power output. With the capability to deliver 260 watts per channel at 4 ohms, the amplifier is designed to drive even the most demanding speakers effortlessly. This power ensures that listeners can enjoy a full-bodied sound with deep bass and crystal-clear highs. The amplifier also supports a wide frequency response range, allowing it to reproduce every nuance of music with remarkable accuracy.

Incorporating Harman's proprietary technologies further enhances the performance of the 2600. The amplifier utilizes advanced Class D amplification technology, which not only improves efficiency but also minimizes heat generation. This technology allows for a compact design without compromising sound quality. The result is an amplifier that can run for extended periods without overheating, making it ideal for long listening sessions or intense audio experiences.

The Harman 2600 features multiple input options, including balanced XLR and unbalanced RCA connections, which provide flexibility when integrating into a home audio system. This versatility is complemented by a robust built-in digital signal processor (DSP) that allows users to customize equalization and sound profiles according to their preferences. The DSP ensures that the Harman 2600 can adapt to various acoustic environments, delivering optimal sound in any setting.

Another notable characteristic of the Harman 2600 is its build quality. Constructed with high-grade components, the amplifier is designed to withstand the test of time while maintaining consistent performance. The elegant design features an aluminum front panel and a well-ventilated chassis, offering both aesthetic appeal and functional efficiency.

Additionally, the amplifier includes protection circuits to safeguard against short circuits, overheating, and overloading, ensuring both user safety and product longevity. In conclusion, with its impressive power, advanced technologies, versatile inputs, and premium build quality, the Harman 2600 stands out as a premier choice for audio enthusiasts seeking a powerful and reliable amplifier for their sound systems. Whether for casual listening or critical playback, the Harman 2600 delivers an exceptional audio experience.