Heat & Glo LifeStyle 550TRSI-AUF Top Vent Vertical Termination Two Elbows, H1 Maximum V1 + V2 Min

Top Vent - Vertical Termination - (continued)

Two Elbows

Note: A 6 in. (152 mm) section of straight flue must be attached to the heater before a 90° elbow.

USE SLP SERIES COMPONENTS ONLY

V2

	V1	H1 Maximum		V2	V1 + V2 Min.
Elbow only		Not allowed		*	*	*
6 in.	152 mm	2 ft.	610 mm	*	*	*
1 ft.	305 mm	4 ft.	1.22 m	*	*	*
2 ft.	610 mm	6 ft.	1.83 m	*	*	*
3 ft.	914 mm	8 ft.	2.44 m	*	*	*
4 ft.	1.22 m	12 ft.	3.66 m	*	*	*
5 ft.	1.52 m	16 ft.	4.88 m	*	*	*

V1 + V2 + H1 = 36 ft. (10.97 m) Maximum

*No specific restrictions on this value EXCEPT V1 + V2 cannot exceed 32 ft. (9.75 m)

H1

V1

Figure 7.10

32 Heat & Glo • 550TRSI-AUF, 550TRSILP-AUF • 2079-980 Rev. N • 5/12