Heat & Glo LifeStyle 550TRSI-AUF Top Vent - Vertical Termination - continued, Three Elbows

Top Vent - Vertical Termination - (continued)

Three Elbows

	V1		H1 + H2			V2	V1 + V2 Minimum		H1 + H2 Maximum
Elbow only			1 ft.	305 mm		*	*	*	1 ft.	305 mm
6 in.		152 mm	2 ft.	610 mm		*	*	*	2 ft.	610 mm
1 ft.		305 mm	2 ft.	610 mm		*	*	*	2 ft.	610 mm
2 ft.		610 mm	4 ft.	1.22 m		*	*	*	4 ft.	1.22 m
3 ft.		914 mm	6 ft.	1.83 m		*	*	*	6 ft.	1.83 m
4 ft.		1.22 m	8 ft.	2.44 m		*	*	*	8 ft.	2.44 m
5 ft.		1.52 m	12 ft.	3.66 m		*	*	*	12 ft.	3.66 m
H1 + H2 = 12 ft. (3.66 m) Maximum						V1 + V2 + H1 + H2 = 32 ft. (9.75 m) Maximum
					Note: A 6 in. (152 mm) section of straight flue
					must be attached to the heater before a 90° elbow.

USE SLP SERIES COMPONENTS ONLY

V2

H1

H2

V1

INSTALLED

HORIZONTALLY

Figure 7.11

Heat & Glo • 550TRSI-AUF, 550TRSILP-AUF • 2079-980 Rev. N • 5/12 33