C. Securing and Leveling the Appliance

WARNING

Fire Risk.

Prevent contact with sagging, loose insulation.

Do NOT install against combustible materials

such as exposed insulation, plastic and insulation backer.

The diagram shows how to properly position, level, and secure the appliance (see Figure 7.4). Nailing tabs are pro- vided to secure the appliance to the framing members.

Place the appliance into position.

Level the appliance from side to side and front to back.

Shim the appliance, as necessary. It is acceptable to use wood shims.

Bend out nailing tabs on each side.

Keep nailing tabs flush with the framing.

Secure the appliance to the framing by using nails or screws through the nailing tabs.

NAILING TABS

(BOTH SIDES)

Figure 7.4 Proper Positioning, Leveling and

Securing of Appliance

WARNING

Fire Risk.

• ALWAYS maintain specified

clearances around the appliance.

• Do NOT notch into the framing around the appliance spacers.

Failure to keep insulation, framing or other material away from the appliance may cause fire.

D. Installing the Flue Restrictor

FLUE RESTRICTOR

Figure 7.5

1.Break the Flue Restrictor into two pieces. Do this by bending the part back and forth until it breaks (see Figure 7.6).

BREAK

HERE

Figure 7.6 Flue Restrictor

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP2110-900 Rev. F • 6/08

21

Page 21
Image 21
Heat & Glo LifeStyle 6000GCF-IPILP owner manual Securing and Leveling the Appliance, Installing the Flue Restrictor