Heat & Glo LifeStyle 6000GCF-IPI B. Vent Components Diagrams continued, Dvp-Trap, DVP-TRAP1

B. Vent Components Diagrams (continued)

Note: Heat shields MUST overlap by a minimum of 1-1/2 in. (38 mm). The heat shield is designed to be used on a wall 4 in. to 7-1/4 in. (102 mm to 184 mm) thick. If wall thickness is less than 4 in. (102 mm) the existing heat shields must be field trimmed. If wall thickness is greater than 7-1/4 in. (184 mm) a DVP-HSM-B will be required.

8in.

(203 mm)

Heat

Shield

15-1/8 in.

(384 mm)

								Term Cap	Minimum	Maximum
			12 in.			Max			Effective Length	Effective Length
		(305 mm)		Effective					4-1/8 in.	5-5/8 in.
					Length			Trap1
		DVP-TRAP							105 mm	143 mm
	Horizontal Termination Cap							Trap2	6-3/4 in.	10-5/8 in.
									171 mm	270 mm
Wall Shield Firestop				DVP-TRAP1			Wall Shield Firestop		HSM	DVP-TRAP2

Heat Shield

Heat Shield

DVP-TRAP1	DVP-TRAP2
Horizontal Termination Cap Kit	Horizontal Termination Cap Kit
	(Shown with optional extended heat shield)

	Wall Shield Firestop	DVP-TRAP1	Wall Shield Firestop		DVP-TRAP2
DVP90ST	Heat Shield		DVP90ST	HSM
				Heat Shield

DVP-TRAPK1	DVP-TRAPK2
Horizontal Termination Cap Kit	Horizontal Termination Cap Kit

Figure 16.3 DVP vent components

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. F • 6/08 49