12 Appliance Setup
A. Remove Shipping Materials
Remove shipping materials from inside or underneath the firebox.
B. Clean the Appliance
Clean/vacuum any sawdust that may have accumulated inside the firebox or underneath
in the control cavity.
C. Accessories
Install approved accessories per instructions included with accessories. See Service Parts List for appropriate accessories. Refer to
Section 16.
Removing Optional GFK-160A Fan
ITEM
1 - Remove front from the fireplace (see Fig- ure 12.1).
2- Remove glass assembly from the fireplace (see Figure 12.1).
3- Remove logs.
4
6
7
2
1
Figure 12.1
4 - Remove grate (see Figure 12.1).
5 | - Remove side and back refractory. |
|
6 | - Remove burner assembly (see Figure 12.1). |
|
7 | - Remove valve assembly (see Figure 12.1). |
|
8 | - Disconnect fan and remove it through the valve as- |
|
| sembly cavity (see Figure 12.2). |
|
| REMOVE FAN THROUGH | 8 |
| VALVE ASSEMBLY CAVITY |
|
| RHEOSTAT |
|
| Figure 12.2 |
|
| Figure 12.3 Rheostat Location |
|
| Heat & Glo • | 35 |
