Heat & Glo LifeStyle ESC-42ST owner manual Securing and Leveling the Appliance

REFRACTORY ASSEMBLY

MESH ASSEMBLY

EMBER GLASS ROCK (TECO-SIL)

MANUAL BAG ASSEMBLY

LOG PACKAGING

Figure 9.6 Appliance Package Identification.

Attach the non-combustible board to the appliance and wall framing with the screws supplied in the manual bag assembly. See Figure 9.7

NON-COMBUSTIBLE

BOARD

FINISHING STRIPS

Figure 9.7 Attaching Non-Combustible Board

B. Securing and Leveling the Appliance

WARNING! Risk of Fire! Prevent contact with:

•Sagging or loose insulation

•Insulation backing or plastic

•Framing and other combustible materials

Block openings into the chase to prevent entry of blown- in insulation. Make sure insulation and other materials are secured.

DO NOT notch the framing around the appliance standoffs.

Failure to maintain air space clearance may cause overheating and fire.

The diagram shows how to properly position and secure the appliance (see Figure 9.8). Nailing tabs are provided to secure the appliance to the framing members.

•Bend out nailing tabs on each side.

•Place the appliance into position.

•Keep nailing tabs flush with the framing.

•Level the appliance from side to side and front to back.

•Shim the appliance as necessary. It is acceptable to use wood shims underneath the appliance.

•Secure the appliance to the framing by using nails or screws through the nailing tabs.

•Secure the appliance to the floor by inserting two screws through the pilot holes at the bottom of the appliance.

Figure 9.8 Proper positioning, leveling and securing of an appliance

Heat & Glo • ESC-42ST • 2146-900 Rev. o • 5/12 35