Heat & Glo LifeStyle ESC-42ST owner manual Grate BAR, Grate Tine

GRATE

BAR

1 2

2 1



Figure 6 Figure 7 Reverse View

LOG NUMBER 2 (SRV2146-702):Place Log #2 as shown. The groove on the bottom of Log #2 engages with the grate bar. Pull log forward so it engages the far right grate tine as shown in Figure 6. The “burnt” end of the log rests on the burner. The log must NOT block any burner ports.

	3
	2
1

GRATE TINE

2

3

1



Figure 8 Figure 9 Reverse View

LOG NUMBER 3 (SRV2146-703):Place Log #3 so that groove on bottom of log engages the grate bar. Push log back so that it rests against grate tine as shown in Figure 9. The “burnt” end of the log rests on the burner. The log must NOT block any burner ports.

4 3

	2
1

Figure 10

2

3 GRATE

TINE

Figure 11 Reverse View

1

4



LOG NUMBER 4 (SRV2146-704):Place Log #4 so that the groove on bottom of log rests on the grate bar as show in Figure 10. Push log so that it rests against the grate tine shown in Figure 11. The “burnt” end of the log rests on the burner. The log must NOT block any burner ports.

Heat & Glo • ESC-42ST • 2146-900 Rev. o • 5/12 53