Heat & Glo LifeStyle ESC-42ST owner manual Framing and Clearances, Selecting Appliance Location

5 Framing and Clearances

A. Selecting Appliance Location

When selecting a location for the appliance it is important to consider the required clearances to walls (see Figure 5.1).

WARNING! Risk of Fire or Burns! Provide adequate clearance around air openings and for service access.

Due to high temperatures, the appliance should be locat- ed out of traffic and away from furniture and draperies.

NOTICE: Illustrations reflect typical installations and are FOR DESIGN PURPOSES ONLY. Illustrations/diagrams are not drawn to scale. Actual installation may vary due to individual design preference.

36 IN.

13 IN. TO FIREPLACE OPENING

13 IN.

	NOTE: 1/2 IN. THICK FACTORY-
36 IN.	SUPPLIED NON-COMBUSTIBLE
	BOARD NOT SHOWN ATTACHED TO
	APPLIANCE.

Figure 5.1 Appliance Locations

Heat & Glo • ESC-42ST • 2146-900 Rev. o • 5/12 19