Operating
Selecting an input signal (continued) | |
1. | Press the VIDEO button on the remote control to select an |
| |
| input for video signal. |
Each time you press the button, the projector switches its | |
video input port as below. | |
COMPONENT VIDEO | |
VIDEO | RGB SEARCH |
ASPECT | AUTO BLANK |
●If the VIDEO button is pushed (when switching from RGB to VIDEO signals) when TURN ON is selected for the AUTO SEARCH item in the OPTION menu the projector will check the COMPONENT VIDEO port first. If no input is detected at the port, projector will begin to check other ports in above order.
Searching an input signal
1. | Press the SEARCH button on the remote control. | VIDEO | RGB SEARCH |
The projector will start to check its input ports in order to | ASPECT | AUTO BLANK |
find any input signals.
Then when an input is found, the projector will stop searching and display the image. If no signal is found, the projector will return to the state selected before the operation.
RGB IN 1 RGB IN 2 COMPONENT VIDEO
Selecting an aspect ratio
1. Press the ASPECT button on the remote control.
Each time you press the button, the projector switches the mode for aspect ratio in turn.
For an RGB signal NORMAL 4:3 16:9
VIDEO RGB SEARCH
For a video signal/no signal 4:3 16:9 SMALL
ASPECT |
| AUTO | BLANK | |
MAGNIFY | HOME | PAGE UP | VOLUME | |
ON | ||||
|
|
|
●The NORMAL mode keeps the original aspect ratio of the signal.
●For an HDTV signal of 1125i (1080i) or 750p (720p) as the COMPONENT VIDEO input, only 16:9 mode can be selected.
●Performing the automatic adjustment initializes the aspect ratio setting.
Adjusting the zoom and focus | Focus ring | Zoom ring | |
1. | Use the zoom ring to adjust the screen size. |
| |
|
| ||
2. | Use the focus ring to focus the picture. |
|
|
19
