Hitachi CP-X255 user manual Shot Still Image Transfer Display, Communication Port

e-Shot (Still Image Transfer) Display

e-Shot (Still ImageTransfer) Display

The projector can display a still image that is transferred via the network.

Communication Port

The following port is used for e-Shot.

TCP #9716

(9)

NOTE • e-Shot is not available via communication ports which are used for the command control (TCP #23 and TCP #9716).

e-Shot (Still Image Transfer) Settings

Configure the following items from a web browser when e-Shot is used.

Example: If the IP address of the projector is set to 192.168.1.10:

1)Enter [https://192.168.1.10] into the address bar of the web browser.

2)Enter the Administrator ID and Password and click [Logon].

3)Click [Port settings] on the main menu.

4)Click the [Enable] check box to open the [Image Transfer Port (Port: 9716)]. Click the [Enable] check box for the [Authentication] setting when authentication is required, otherwise clear the check box.

5)Click the [Apply] button to save the settings.

31