Multifunctional settings
NETWORK Menu
Select [Network] from the main menu to access the following functions.
MENU [RGB] |
| :SELECT |
PICTURE | DHCP | TURN OFF |
IMAGE | IP ADDRESS |
|
INPUT | SUBNET MASK |
|
SETUP | DEFAULT GATEWAY | |
SCREEN | DATE AND TIME |
|
OPTION | TIME DIFFERENCE | |
NETWORK | e‑SHOT |
|
EASY MENU | INFORMATION |
|
NOTE • The factory default setting for DHCP is “TURN ON”. There is no need to set up [DHCP], [IP ADDRESS], [SUBNET MASK] or [DEFAULT GATEWAY] if your network
has DHCP enabled. ( User’s Manual - Network Functions)
•If you are not utilizing SNTP ( User’s Manual - Network Functions), then you must set the DATE AND TIME during the initial installation. Please refer to the item DATE AND TIME on the following list.
NOTE Consult with your network administrator before connecting to an existing access point on your network. Incorrect network settings on this projector may cause trouble on the network.
Item | Operation |
| |
DHCP | DHCP TURN ON/TURN OFF: | DHCP | |
Use the ▲/▼ buttons to turn DHCP on/off | TURN ON | ||
(Dynamic Host | TURN OFF | ||
TURN ON TURN OFF |
| ||
Configuration |
| ||
Select TURN OFF when the network does not have DHCP | |||
Protocol) | |||
enabled. |
| ||
|
| ||
| Entering the IP ADDRESS : |
| |
| Use the ▲/▼/◄/► buttons to enter the IP | 192. 168. 1. 254 | |
| ADDRESS. This function can only be used | IP ADDRESS | |
IP ADDRESS | when DHCP is set to “TURN OFF”. |
| |
~Note~ |
| ||
|
| ||
| The IP ADDRESS is the number that identifies this projector on the | ||
| network. You cannot have two devices with the same IP ADDRESS | ||
| on the same network. |
| |
| Entering the SUBNET MASK : |
| |
| Use the buttons ▲/▼/◄/► to enter the | 255. 255. 255. 0 | |
SUBNET MASK same SUBNET MASK used by your PC. | SUBNET MASK | ||
| This function can only be used when DHCP |
| |
| is set to “TURN OFF”. |
| |
40
