Speciﬁcation, RGB input Video input, Audio output | Hitachi CP-X255

Warranty And After-Service

Warranty and after-service

If a problem occurs with the equipment, ﬁrst refer to the “Troubleshooting” and run through the suggested checks. If this does not resolve the problem, please contact your dealer or service company. They will tell you what warranty condition is applied.

Speciﬁcations

Speciﬁcations

NOTE • These speciﬁcations are subject to change without notice.

	Item			Speciﬁcation
Product name		Liquid crystal projector
	Panel size	1.5 cm (0.6 type)
Liquid
Crystal	Drive system	TFT active matrix
panel		CP-S245 : 480,000 pixels (800 horizontal x 600 vertical)
	Pixels
		CP-X255 : 786,432 pixels (1024 horizontal x 768 vertical)
Lens		Zoom lens F=1.7 ~ 1.9 f=18.9 ~ 22.6 mm
Lamp		180W UHB
Speaker		1W x 1
Power Supply		AC100-120V/3.1A, AC220-240V/1.7A
Power Consumption		290W
Temperature range		5 ~ 35°C (Operating)
		306 (W) x 86 (H) x 249 (D) mm
Size		(Not including protruding parts)
		• Please refer to the following ﬁgure.
Weight (mass)		3.0 kg
		RGB input:			Video input:
		RGB IN1 ..D-sub 15pin mini x1			COMPONENT VIDEO
		RGB IN2 /OUT			(Y, CB/PB, CR/PR)		RCA x3
		D-sub 15pin mini		x1	S-Video		1
		(select RGB IN2 or RGB OUT)			Video		1
Ports
		Audio input:			Communication port:
		AUDIO 1	Stereo mini x1		CONTROL	D-sub 9pin x1
		AUDIO 2		RCA x2	USB	USB(B) x1
		Audio output:			LAN	RJ-45 x1
		AUDIO OUT ...	Stereo mini x1
	Lamp	DT00731
Optional
	Air ﬁlter	NJ22222
parts
	Others	• Please consult your dealer.

55

Image 55

Hitachi CP-X255 user manual Speciﬁcation, RGB input Video input, Audio input Communication port, Audio output

Contents

Thank you for purchasing this projector About this manualTrademark acknowledgment Content About contents of package Fastening the lens cover Projector Part names CB/PB ComponentCR/PR Control buttons Remote controlMagnify Setting up For the model CP-S245 ArrangementFor the model CP-X255 Adjusting the projectors elevator How to attach Using the Security Bar About Plug-and-Play capability Connecting your devices Examples of connection with a computer CB/PB Connecting to a monitor outputConnecting to a speaker with ampliﬁer output Examples of connection with a VCR/DVD player Connecting power supply Putting batteries Remote control Using the remote control Turning on the power Power on/offTurning off the power Temporarily muting the sound Adjusting the volumeSelecting an input signal Operating  For a video signal/no signal 43  169  Small Searching an input signalAdjusting the zoom and focus Selecting an input signal  For a video signal or s-video signal Using the automatic adjustment featureAdjusting the position  For an RGB signal Correcting the keystone distortions Using the magnify featurePress the on button of Magnify on the remote control No operation, and the projector will enter the Magnify mode Temporarily blanking the screen Freezing the screen Operating the computer screen Available function Remote control operationUSB mouse and keyboard control Advanced Menu Multifunctional settingsUsing the menu function Easy Menu Easy Menu Filter Time ResetEasy Menu Mirror Gamma Picture Menu Secam Picture MenuHigh  Middle  LOW  Custom Color Temp SAVE4 SAVE3  SAVE2  SAVE1 TV  Film  Turn OFFProgressive LOAD1  LOAD2  LOAD3  LOAD4 Position PhaseImage Menu Over Scan Execute Auto AdjustImage Menu Size Video Format Input MenuColor Space Component Information Input Menu Volume Setup MenuAudio Bright  Dark Screen MenuMenu Position OSD Bright MyScreen Lock Screen MenuStart UP MyScreen No Input is Detected Message Auto OFF Reset  CancelOption Menu Auto Search Option Menu Dhcp Network MenuIP Address Network Menu Network Functions Refer to the separate volume on Network Functions Lamp MaintenanceLamp Lamp Case of replacement by yourselfType number = DT00731 Type number = NJ22222 Air ﬁlter Air ﬁltre Replacing Internal Clock battery Page Is out of the response parameter range of this unit There is no input signalInternal temperature is rising Related messages Regarding the indicator lamps Regarding the indicator lamps Signal source does not correctly work Electrical power cord is not pluggedPower switch is not set to the on position Signal cables are not correctly connected Color Space setting is not suitable Volume is adjusted to an extremely low levelAudio setting is not correct Color settings are not correctly adjusted Lamp is approaching the end of its product Lifetime Not properly adjustedEither the focus and/or horizontal phase settings are Whisper function is working Audio output SpeciﬁcationRGB input Video input Audio input Communication port Speciﬁcations CP-S245/X255 only Still Image Transfer Failure & Warning Alerts via E-mailProjector Management via Snmp Controlling the Projector via Scheduling Before using the network functions… Conﬁguring and controlling the projector via a web browser Conﬁguring and controlling the projector via a web browser Https//192.168.1.10 into Settings Network Information Displays the Dhcp conﬁguration settings Dhcp OFF Network SettingsDisplays and conﬁgures network settings Dhcp on Displays and conﬁgures communication port settings Port SettingsClick the Apply button to save the settings Displays and conﬁgures e-mail addressing settings Mail Settings Displays and conﬁgures failure & warning alerts Alert Settings Air Flow Error Alert SettingsLamp Error Temp Error Cool Error Lamp Time ErrorFilter Error Schedule Execution Error Other ErrorLamp Time Alarm Displayed Filter Time AlarmAuthentication Failure Change the Lamp is Displays and conﬁgures schedule settings Schedule Settings Schedule Setting Displays and conﬁgures the date and time settings Date/Time SettingsParameter Sntp Date/Time Settings Snmp Security Settings Projector Control Projector Control Projector Control Displays and conﬁgures the current projector status Projector Status Description Restart Network RestartLogoff Restarts the projector’s network connection 10 Failure & Warning Alerts via E -mailExample If the IP address of the projector is set to Mail Settings Projector management via Snmp Snmp settingsConﬁgure the following items via a web browser to use Snmp Controlling the Projector via Scheduling Date/Time setting can be adjusted via a web browser Date/Time Settings 18 Schedule settings can be conﬁgured from a web browser Schedule Settings 16 Following port is used for e-Shot TCP #9716 Shot Still Image Transfer SettingsShot Still Image Transfer Display Communication Port Shot Still Image Transfer Transmission Shot Still Image Transfer Settings Command Control Settings 9 Command Control via the Network 20 Command Control Settings Send Data format Command formatReply Error code Header Data RS-232Ccommand Reply Data format Automatic Connection Break Authentication Vesa Text Example of computer signalVesa Initial set signals Connection to the ports Except when set to RGB OUT Component Video C Y, D CB/PB, E CR/PR LAN RJ-45 jack Audio 1-IN Ø3.5 stereo mini jack, I J Audio 2 L/R RCA jackRTS CTS Communications setting Connecting the cableRS-232C Communication Increasing the projector setting value Increment command Requesting projector status Get commandChanging the projector settings Set command Using the projector default settings Reset Command RS-232C Communication Be EF FB FA Color Temp Gain G Aspect Keystone Mute OSD Bright Greece