Hitachi CP-X255 user manual Port Settings, Displays and configures communication port settings

Settings

Port Settings

Displays and configures communication port settings.

	Item	Description
Network Control Port1		Configures command control port 1 (Port:23).
(Port:23)
	Port open	Click the [Enable] check box to use port 23.
	Authentication	Click the [Enable] check box when authentication is required
		for this port.
Network Control Port2		Configures command control port 2 (Port:9715).
(Port:9715)
	Port open	Click the [Enable] check box to use port 9715.
	Authentication	Click the [Enable] check box when authentication is required
		for this port.
Image Transfer Port		Configures the image transfer port (Port:9716).
(Port:9716)
	Port open	Click the [Enable] check box to use port 9716.
	Authentication	Click the [Enable] check box when authentication is required
		for this port.
SNMP Port		Configures the SNMP port.
	Port open	Click the [Enable] check box to use SNMP.
	Trap address	Configures the destination of the SNMP Trap in IP format.
SMTP Port		Configures the SMTP port.
	Port open	Click the [Enable] check box to use the e-mail function.

Click the [Apply] button to save the settings.

NOTE • The new configuration settings are activated after restarting the network connection. The network connection must be restarted when the configuration settings are changed. The network connection can be restarted using [Network Restart] on the main menu.dresses.

9