Controlling the Projector via Scheduling

Schedule Settings (16)

Schedule settings can be configured from a web browser.

Example: If the IP address of the projector is set to 192.168.1.10:

1)Enter [https://192.168.1.10] into the address bar of the web browser.

2)Enter the Administrator ID and Password and click [Logon].

3)Click [Schedule Settings] on the main menu and select the required schedule item.

4)Click the [Enable] check box to enable scheduling.

5)Enter the Date (Month/Day) for specific date scheduling.

6)Click [Add] and set the hour, command and parameters and click [Add This Schedule] when you want to add a command.

7)Click the [Delete] button when you want to delete a schedule.

8)Click the [Apply] button to save the settings.

There are three types of scheduling.

1)Daily: Perform the specified operation at a specified time every day.

2)Sunday ~ Saturday: Perform the specified operation at the specified time on a specified day of the week.

3)Specific Date: Perform the specified operation on the specified date and time.

NOTE • In Standby mode the power indicator will flash green for approx. 3 seconds when at least 1 “Power ON” schedule is saved.

When the schedule function is used, the power cord must be connected to the projector and the outlet and the power switch must be turned on, [ ]. The schedule function does not work when the power switch is turned off, [] or the breaker in a room is tripped. The power indicator will lights orange or green when the projector gets is receiving the power.

30

Page 86
Image 86
Hitachi CP-X255 user manual Schedule Settings 16, Schedule settings can be configured from a web browser