Multifunctional settings

IMAGE Menu

With the IMAGE menu, items shown in the table below can be performed.

Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to execute the item. Then perform it referring to the following table.

 MENU [RGB]

   :SELECT

 PICTURE

 ASPECT         4:3

 IMAGE

 OVER SCAN      5

 INPUT

 V POSITION     25

 SETUP

 H POSITION     142

 SCREEN

 H PHASE        16

 OPTION

 H SIZE         1344

 NETWORK

 AUTO ADJUST EXECUTE

 EASY MENU

 

Item

Description

 

 

 

Using the buttons ▲/▼ switches the mode for aspect ratio.

 

For an RGB signal

 

4:3 16:9 NORMAL

ASPECT

For a video signal / no signal

 

4:3 16:9 SMALL

 

• The NORMAL mode keeps the original aspect ratio of the signal.

 

• For an HDTV signal of 1125i (1080i) or 750p (720p) as the

 

COMPONENT VIDEO input, this item can't be selected.

 

Using the buttons ▲/▼ adjusts the over-scan ratio.

OVER SCAN

Large (It reduces picture) Small (It magnifies picture)

• This item can be selected only for a video signal.

 

• When this adjustment is too large, certain degradation may appear

 

at the frame area of the picture. In such a case, please adjust small.

 

Using the buttons ▲/▼ adjusts the vertical position.

 

Up Down

V POSITION

Over-adjusting the vertical position may cause noise to appear

 

on the screen. If this occurs please reset the vertical position to the

 

default setting. Pressing the RESET button when V POSITION is

 

selected will reset the V POSITION to the default setting.

 

Using the buttons ▲/▼ adjusts the horizontal position.

 

Left Right

H POSITION

Over-adjusting the horizontal position may cause noise to appear

 

on the screen. If this occurs please reset the horizontal position to

 

the default setting. Pressing the RESET button when H POSITION

 

is selected will reset the H POSITION to the default setting.

 

Using the buttons ▲/▼ adjusts the horizontal phase to eliminate

 

flicker.

H PHASE

Right Left

• This item can be selected only for an RGB signal or a component

 

 

video signal. Note that this does not work with the input signal of

 

525i(480i)/625i(576i)/SCART RGB from the component video port.

30

Page 30
Image 30
Hitachi CP-X255 user manual Image Menu, Over Scan, Position, Phase