1<>2/3
Zooming
English
If you continue to hold the zoom lever on the “T” control side with Dig. Zoom specified, the digital zoom will be activated midway (when optical
You can zoom up to
W:recording wide area
T: recording enlarged image (telephoto)
1 Press the MENU button, choose “Dig. Zoom” on the “Camera Functions Setup” menu screen, and then press the Abutton.
2 Choose the desired magnification, and then press the Abutton.
3 Press the MENU button to end the setting.
Moving the zoom lever will display the digital zoom bar.
Note:
•The digital zoom setting will be stored in memory even if the DVD video camera/recorder is turned off.
•You can also use the DIGITAL ZOOM button on remote control to switch the digital zoom setting: Pressing the button during movie recording will switch the setting between “Off”, “40×”*1, and “500×”*2: Pressing the button during photo recording will switch between “Off” and “40×”*1.
•If you set zoom to “500×”*2 when recording photo, the digital zoom will be up to 40×*1.
•When a subject is zoomed, it may be momentarily out of focus.
•When digital zoom is engaged, the image quality will be rougher.
*1 “60x” on
*2 “800x” on
MACRO RECORDING
Use the macro function when recording a small object from
1 Aim the DVD video camera/recorder at the subject, and press the zoom lever to “W” control side.
Note:
•Zoom can be used, but the subject may not be focused, depending on the distance to the subject. In this case, move the zoom to “W” control side to focus.
•The amount of light tends to be insufficient during macro recording: If the subject image is too dark, use additional lighting.
51