13
COPYING STILLS ON DVD-RAM DISC TO CARD (COPY)
English
1 Set the power switch to “O” or “N“.
2 Press the DISC NAVIGATION button.
3 Select the still to be copied.
4 Press the MENU button.
5 Choose “Copy” on the “Scene” menu screen, and then press the Abutton.
6 The “Copy to card” screen will appear: If you are sure you want to copy the selected still, press the Abutton.
If you want to change the still to be copied, you can change it on this screen.
7 The screen for verifying copy will appear:
Choose “YES”, and then press the A button.
Choose “NO” to cancel copy.
After Yes or No setting, the “Copy to card” screen will be restored.
Repeat steps 6 and 7 to copy other stills to card.
8 Press the Cbutton to quit.
Note:
•No movie can be copied.
•If you press the MENU button before pressing the Abutton in step 6, the submenu screen will appear (p. 80).
•See “Category” (p. 104) to check the stills recorded on
•You can also select multiple scenes (p. 75).
•Even if all scenes, including movies, are selected to be copied, only stills will be copied.
•Data on card cannot be copied to disc.
•The quality of still copied from disc to card will be the same as when you recorded still on disc.
•Stills recorded on a device other than this DVD video camera/recorder may not be copied normally.
85
