Hitachi C9295A#B1H, E609 manual Clear jams, Clear a jam in the device, To clear a jam

Clear jams

Occasionally, media becomes jammed during a job. Try the following remedies before you attempt to clear the jam.

•Make sure that you are printing with media that meets specifications. For more information, see Select print media.

•Make sure to print with media that is not wrinkled, folded, or damaged.

•Make sure that the input trays are loaded correctly and are not too full. For more information, see Load media.

•Clear a jam in the device

•Tips for avoiding jams

Clear a jam in the device

To clear a jam

1.Remove all media from the output tray.

CAUTION: Trying to clear a paper jam from the front of the device can damage the print mechanism. Always access and clear paper jams through the rear access panel or duplexer.

2.Check the rear access panel or duplexer.

a. Push the button on either side of the rear access panel or duplexer, and then remove the panel or unit.

b. Locate any jammed media inside the device, grasp it with both hands and then pull it towards you.

c. If the jam is not there, and you are using a duplexer, push the latch on the top of the duplexer and lower its cover. If the jam is inside, carefully remove it. Close the cover.

d. Reinsert the rear access panel or duplexer into the device.

Clear jams 111