Honeywell Demos manual Imaging Demo, To Capture Images, To Save Images, Save As

2

Imaging Demo

Overview

The Imaging Demo demonstrates the imaging functionality of the on-board image engine, such as picture formatting, saving and printing.

To Capture Images

1.Tap Start > Demos > Imaging Demo. The Imaging Demo opens.

The screen is blank until you press the SCAN key.

2.Press the SCAN key to activate the image engine. A preview of the image appears on the screen.

The previewed image has a degraded appearance. This is normal. The previewed image is not the same as the captured image; the captured image will not have the same degradation.

3.Release the button or trigger. The captured image appears on the screen.

To Save Images

You can save images two ways: Save and Save As. Save saves one image with a default name. Save As allows you to determine the image parameters.

Save

Tap File > Save. The image remains on the screen and is saved as a grayscale .jpg with the name “imagedemo.jpg” in the My Device folder (\IPSM).

Note: If you take another image and tap File > Save. The new image will save over the existing imagedemo.jpg file.

OR

Save As

Dolphin® Demos User’s Guide	Rev A	2 - 1
	8/6/08