8

Using Image View

Overview

Image View is a software installed on the host workstation and receives data via wireless connection from the following Demos on the terminal:

Imaging Demo

IQ Imaging Demo

Scan Demo

Signature Capture Demo

Note: Contact your nearest Honeywell technical support office to retrieve the latest version of Image View.

Requirements

Image View must be installed and configured on the host workstation.

Both the Dolphin terminal and Image View on the host workstation must have the same IP address and TCP port.

Configuring ImageView on the Workstation

1.On the host workstation, click the ImageView.exe file and complete the installation process.

2.Click File > Setup.

3.In the IP Address field, enter the IP address of the host workstation.

4.Use the default Decode Port and Image Port for the host workstation.

5.Tap Apply. The network parameters are set.

6.Now, you need to configure the Demos on the terminal.

Dolphin® Demos User’s Guide

Rev A

8 - 1

 

8/6/08

 

Page 39
Image 39
Honeywell Demos manual Using Image View, Configuring ImageView on the Workstation, Click File Setup