VI. MAINTENANCE AND CLEANING INSTRUCTIONS
IMPORTANT
Ensure all components, fasteners and thumbscrews are securely in place after any maintenance or cleaning is done to the equipment.
1. PREPARING THE ICEMAKER FOR LONG STORAGE
IMPORTANT
When shutting off the icemaker for an extended time, drain out all water from the water tank and remove the ice from the Storage Bin. The Storage Bin should be cleaned and dried. Drain the icemaker to prevent damage to the water supply line at
•When the icemaker is not used for two or three days, it is sufficient to move the Con- trol Switch to the “OFF” position, unless the icemaker will be at
[1]On
1)Remove the Front Panel.
2)Move the Control Switch, on the Control Box, to the “OFF” position.
3)Wait 3 minutes.
4)Move the Control Switch to the “ICE” position.
5)Allow 5 minutes for the icemaker to fill with water and the Water Pump to start operating.
6)Close the
7)Open the Drain Valve for the
8)Allow the line to drain by gravity.
9)Attach compressed air or carbon dioxide supply to the Condenser Water Line Drain Valve.
10)Quickly blow the
56
