[d] CONTROLS AND ADJUSTMENTS
The Dip Switch is
DIP SWITCH NO. | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
|
|
|
|
|
|
|
|
|
|
|
OFF | OFF | ON | ON | ON | ON | OFF | OFF | OFF | OFF | |
|
|
|
|
|
|
|
|
|
|
|
OFF | OFF | ON | OFF | ON | ON | OFF | OFF | OFF | ON | |
|
|
|
|
|
|
|
|
|
|
|
OFF | OFF | ON | OFF | ON | ON | OFF | OFF | OFF | OFF | |
|
|
|
|
|
|
|
|
|
|
|
Switch Nos. 1 and 2:
Used for adjustment of the Defrost Timer.
The Defrost Timer starts counting when the Thermistor reads a certain temperature at the Evaporator outlet.
Switch Nos. 3 and 4:
Used for adjustment of the Drain Timer.
When a freeze cycle is completed, the Pump Motor stops, and the icemaker resumes operation in 2 seconds. Then the Pump Motor drains the Water Tank for the time determined by the Drain Timer. The Drain Timer also determines the time to restrain completion of a defrost cycle, i.e. the minimum defrost time.
Switch Nos. 5 and 6:
Used for adjustment of the Drain Counter.
The Pump Motor drains the Water Tank at the frequency determined by the Drain Counter.
Switch Nos. 7 and 8:
Used only for checking the Controller Board. Usually set in OFF position.
Switch Nos. 9 and 10:
Used for adjustment of Freeze Timer. The Freeze Timer determines maximum freeze cycle time. Upon termination of Freeze Timer, machine initiates the harvest cycle. After 2 consecutive timer terminations, machine will shut down, possibly indicating a problem.
21
