Hoshizaki KMD-410MWH manual Spray Tube, Water Supply Tube, Spray Guide, g STARTER, h RUN CAPACITOR

[g] STARTER

1)Disconnect the terminals, remove the mounting screw.

2)Install the new starter in the reverse order of the removal procedure.

3)To prevent miswiring, check the terminal numbers and lead wire colors with the wiring label.

[h] RUN CAPACITOR

1)Disconnect the terminals on the starter and remove the nut securing the run capacitor.

2)Install the new run capacitor in the reverse order of the removal procedure.

3)To prevent miswiring, check the terminal numbers and lead wire colors with the wiring label.

[i] START CAPACITOR

1)Disconnect the terminals on the starter and remove the nut securing the run capacitor.

2)Install the new run capacitor in the reverse order of the removal procedure.

3)To prevent miswiring, check the terminal numbers and lead wire colors with the wiring label.

[j] CAPACITOR FOR PUMP MOTOR

1)Disconnect the tab terminals, remove the screw.

2)Install the new capacitor in the reverse order of the removal procedure.

19. SPRAY TUBE, WATER SUPPLY TUBE, SPRAY GUIDE

1)Turn off the power supply.

2)Remove the panels and front insulation.

3)Remove the hose band connecting the hose.

4)Push the tabs on both sides of the spray tube to release the spray tube.

5)Pull the spray tube towards you.

53