126
5 ShootingSettings
2 Under the light you wish to measure the white balance of, fully display a white sheet of paper on the monitor, or select a white area as the subject.
3 Press the shutter release button fully.
Set [Focus Method] to \ when the shutter cannot be released. Adjust the white balance as necessary. (p.127)
4 Press the 4button.
The camera is ready to take a picture.
• No image is recorded when the shutter release button is pressed to adjust the white balance.
•The message [The operation could not be completed correctly] appears when measuring is unsuccessful. Press the 4button while displayed to remeasure the white balance.
•If a picture is extremely overexposed or underexposed, the white balance may not be adjusted. In this case, adjust exposure to the correct exposure before adjusting the white balance.