Error Messages

Description

Not enough battery

Appears when trying to update the firmware if the

battery level is insufficient. Install a fully charged

power remaining to

battery, or use the AC adaptor kit K-AC115

update the firmware

(optional). (p.40)

 

 

 

Unable to update firmware.

Unable to update the firmware. The update file is

There is a problem with the

damaged. Try downloading the update file again.

firmware update file

(p.197)

 

The maximum folder number (999) and file

Image folder cannot be

number (9999) are being used, and no more

created

images can be saved. Insert a new SD Memory

 

Card or format the card. (p.198)

Unable to store image

The image could not be saved because of an SD

Memory Card error.

 

 

The DPOF settings could not be saved because

Settings not stored

SD Memory Card is full. Delete unwanted images

 

and perform DPOF setting again. (p.165)

The operation could not be

The camera was unable to measure the manual

white balance (p.125) or use HDR Capture

completed correctly

(p.130). Try the operation again.

 

 

 

No more images can be

You cannot select 100 or more images at a time

selected

for Index (p.160) and Select & Delete (p.165).

 

There are no images that can be processed

No image can be processed

using Digital Filter (p.174) or RAW Development

 

(p.180) function.

 

Appears when you try to perform Resize (p.172),

 

Cropping (p.173), Digital Filter (p.174), Red-eye

This image cannot be

Edit (p.179) or RAW Development (p.180) for

processed

images captured with other cameras, or when

 

you try to perform Resize or Cropping for

 

minimum file size images.

The camera failed to create

The creation of an index print image failed.

an image

(p.160)

This function is not available

You are trying to set a function that is not

available when the capture mode is set to n

in the current mode

(Auto Picture), H(Scene) or C (Movie) mode.

 

 

 

The camera will turn off

The camera will turn off because its internal

temperature gets too hot. Leave the camera

to prevent damage from

turned off until it has had time to cool down

overheating

before turning on the camera again.

 

 

 

233

11

Appendix