194

8

3 Use the four-way controller (45) to adjust the value.

Press the d/i button to reset the adjustment value. (Available only when [Green Button] is assigned to the d/ibutton in [Green Button] of the [A Rec. Mode 3] menu) (p.144).).

4 Press the 4button.

5 Press the 3button.

The screen that was displayed before selecting the menu appears again.

Correcting Defective Pixels in the CMOS Sensor (Pixel Mapping)

Pixel Mapping is a function for mapping out and correcting defective pixels in the CMOS sensor.

1 Select [Pixel Mapping] in the [RSet-up 3] menu, and press the four-way controller (5).

The [Pixel Mapping] screen appears.

2 Use the four-way controller (23) to select [Pixel Mapping], and press the 4button.

Settings Additional Changing

Defective pixels are mapped and corrected, and the screen that was displayed before selecting the menu appears again.

When the battery level is low, [Not enough battery power remaining to activate Pixel Mapping] is displayed on the monitor. Use the AC adapter kit K-AC115 (optional) or install a fully charged battery.