2 Turn the e-dial to adjust the value.

5 appears on the monitor before the value that can be changed.

The following parameters can be changed depending on the selected exposure mode.

1/2000 F2.8

1600

[ 37]

eItem set in [Green Button] of the [ARec. Mode 3] menu (p.146)

bShutter speed

cAperture value

aShutter speed

3 When set to amode, press the mcbutton (1), and then turn the e-dial (2) to change the

aperture value.

2

 

The exposure compensation value can

1

be adjusted by this operation in e/b/c

 

mode. (p.80)

• A proper exposure may not be obtained with the selected shutter speed and aperture value when the sensitivity is set to the fixed value (p.75).

•Use an optional ND (Neutral Density) filter if the subject is too bright. Use a flash if it is too dark.

•In amode, the difference from the proper exposure is displayed in a bar graph while the shutter speed or aperture value is adjusted. The exposure value is displayed in red when the difference from the proper exposure becomes ±3.0 or larger.

•You can set the function of the d/i button when the exposure mode is set to a. Set in [Green Button] of the [A Rec. Mode 3] menu. (p.147)

•Sensitivity values higher than ISO 1600 are not available when the shutter speed is set to 2 sec. or slower in b/a mode.

77

4 ShootingFunctions