1

 

 

 

Press the four-way controller (3) in Step 2 on p.58.

 

2

 

 

Turn the e-dial.

 

Auto Flash Discharge

 

The flash compensation value is

 

 

 

 

 

 

displayed.

 

 

 

Press the d/i button to reset the value

+0.7

 

 

to 0.0. (Available only when [Green

 

 

 

Button] is assigned to the d/i button in

MENU Cancel

OK OK

 

[Green Button] of the [A Rec. Mode 3]

 

 

 

menu (p.144).)

 

 

• When the flash output exceeds its maximum amount, the compensation will not be effective even if the compensation value is set to the plus (+) side.

Compensating to the minus (-) side may have no effect if the subject is too close, the aperture is set to a large opening, or sensitivity is high.

The flash output compensation is also effective for external flash units which support P-TTL auto flash mode.

Shooting with the Flash

1 Select a flash mode.

2 Slide the flash pop-up switch in the direction of the arrow.

The built-in flash pops up.

3 Press the shutter release button halfway.

The flash starts charging.

4 Press the shutter release button fully.

59

3 BasicOperations

The picture is taken.