234Troubleshooting
11
Appendix
In rare cases, the camera may not operate correctly due to static electricity. This can be remedied by taking the battery out and putting it back in again. After these procedures are done, if the camera operates correctly, it does not require any repairs.
We recommend checking the following items before contacting a service center.
Problem | Cause | Remedy | |
| Battery is not | Check if battery is installed. If not, install a | |
The camera | installed | fully charged battery. | |
Battery is not | Check the orientation of battery. (p.38) | ||
does not turn | |||
installed properly | |||
on |
| ||
|
| ||
| The battery power | Install a fully charged battery, or use the | |
| is low | AC adaptor kit | |
| The | Wait until charging is finished. | |
| charging | ||
|
| ||
The shutter | There is no | Insert an SD Memory Card with available | |
cannot be | available space on | ||
space or delete unwanted images. (p.43, | |||
released | the SD Memory | ||
| Card | ||
|
| ||
|
|
| |
| Recording | Wait until recording is finished. | |
|
|
| |
|
| Autofocus cannot work well for subjects | |
|
| that have low contrast (the sky, white | |
|
| walls, etc.), dark colors, intricate designs, | |
|
| ||
| The subject is | through a window or a | |
| difficult to focus on | Lock focus on another object located at | |
|
| the same distance as your subject, then | |
Autofocus does |
| aim at the target and press the shutter | |
not work |
| release button fully. Alternatively, use | |
|
| manual focus. (p.92) | |
|
| Position the subject in the focus frame on | |
|
| the monitor. If the subject is outside the | |
| The subject is not in | focusing area, aim the camera at the | |
| the focusing area | subject and lock the focus, then compose | |
|
| a picture and press the shutter release | |
|
| button fully. (p.91) |