chapter 12
hardware installation troubleshooting
Use this section to solve any problems you might encounter while installing the HP psc hardware.
problem | possible cause and solution |
| |
I received a message to | The front panel cover is not attached, or it is attached incorrectly. | ||
attach the front panel | to attach the front panel cover |
| |
cover |
| ||
1 Remove the adhesive backing from the front panel cover. | |||
| |||
| step 1 | step 2 | |
troubleshooting
| 2 Raise the lid of the HP psc. Place the front panel cover into the |
| recess and stick it into place. |
| Note: The HP psc will not work until you attach the front panel |
| cover. |
|
|
My HP psc does not | Make sure each of the power cords is firmly connected, and wait a few |
turn on | seconds for the HP psc to turn on. Also, if the HP psc is plugged in to |
| a power strip, make sure the strip is turned on. |
64 | hp psc 1310 series |