maintain your hp psc
Note: It is normal to see ink buildup in the print cartridge slots.
4Remove the new print cartridge from its packaging and, being careful to touch only the bright pink plastic tab, gently remove the plastic tape to uncover the ink nozzles.
Caution! Do not touch the
After you have removed the plastic tape, install the print cartridge immediately to prevent the ink from drying in the nozzles.
5Hold the black print cartridge with the HP label on top. Slide the print cartridge at a slight angle into the ULJKW side of the print carriage. Press firmly until the print cartridge snaps into place.
Caution! Do not attempt to push the cartridge straight into the slot. It must slide in at a slight angle.
6Hold the
Press firmly until the print cartridge snaps into place.
Caution! Do not attempt to push the cartridge straight into the slot. It must slide in at a slight angle.
Note: You must install ERWK print cartridges in order for your HP psc to work.
maintain your hp psc
user guide | 31 |