chapter 11

hardware installation troubleshooting

Use this section to solve any problems you might encounter while installing the HP PSC hardware.

problem

possible cause and solution

 

I received a message to

The front panel cover is not attached, or it is attached incorrectly.

attach the front panel

to attach the front panel cover

 

cover

 

1 Remove the adhesive backing from the front panel cover.

 

 

step 1

step 2

 

2 Raise the lid of the HP PSC. Place the front panel cover into the

 

recess and stick it into place.

 

Note: The HP PSC will not work until you attach the front panel

 

cover.

 

 

My HP PSC does not

Make sure each of the power cords is firmly connected, and wait a

turn on

few seconds for the HP PSC to turn on. Also, if the HP PSC is plugged

 

in to a power strip, make sure the strip is turned on.

68

hp psc 1300 series

Page 74
Image 74
HP 1340, 1350xi, 1350v, 1355 manual Recess and stick it into place, To a power strip, make sure the strip is turned on