HP 18XL280 manual Insert and Remove Discs, Inserting a Disc

Insert and Remove Discs

This section covers:

•Inserting a Disc

•Removing a Disc

•Manually Ejecting a Disc

Inserting a Disc

To load a disc into the disc drive, complete the following steps:

ÄCaution: Improper handling of a CD or DVD can damage the disc and could potentially damage the drive.

1.Press the Eject button located on the front of the drive.

2.Remove a disc from its protective case, holding the disc by its center hole and outer edge to avoid touching the surface.

3.Place the disc, label side up (unless it is a double-sided DVD), into the round area of the tray. Gently press the disc down onto the center spindle of the tray until the disc snaps into place.

ÄCaution: Before closing the disc tray, ensure that the disc snaps onto the spindle in the center of the tray. You can damage the disc and your Notebook if the disc is not seated properly.

4.Push the tray back into the drive until the drive locks into place.

5-2 USING THE CD OR DVD DRIVE	PRESARIO MOBILE INTERNET PC BEYOND SETUP GUIDE
	1800 SERIES