and EMC Regulatory | Statements |
Safety |
|
|
|
Safety and EMC Regulatory Statements
EMC Regulatory Statements
European Community
DECLARATION OF CONFORMITY
according to ISO/IEC
______________________________________________________________________
Supplier's Name: | DOC#: | |
|
| (x=A,B,C or D) |
Supplier's Address: | 8000 Foothills Blvd. |
|
| Roseville, CA |
|
| U.S.A. |
|
declares, that the product
Product Name2: ProCurve Switch
Product Model(s): J9085A, J9086A, J9087A, J9088A, J9089A
Regulatory Model Number1:
Product Options:J8168A, J8169A*, J4858B/C, J4859B/C, J4860B/C
* For use with J9086A, J9087A and J9089A only.
conforms to the following Product Specifications and Regulations:
EMC: Class A
EN 55022:2006
EN 55024:1998 +A1:2001 +A2:2003
EN
EN
FCC CFR47 Part 15
Safety:
EN
IEC
EN
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference; and, (2) this device must accept any interference received, including interference that may cause undesired operation.
The product herewith complies with the requirements of the Low Voltage Directive 2006/95/EC, the EMC Directive 2004/108/EC, and carries the
Additional Information:
1)This product is assigned a Regulatory Model Number which stays with the regulatory aspects of the design. The Regulatory Model Number is the main product identifier in the regulatory documentation and test reports. This number should not be confused with the marketing name or the product numbers.
2)This product was tested with HP branded products only.
Roseville,06 February 2009
European Contact: Your local
TRE, Herrenberger Straße 140,