Introducing the Switch

Introducing the Switch

Front of the Switch

Port LEDs

The port LEDs provide information about the individual switch ports.

Table 1-3.

Port LEDs

 

 

 

 

Switch LEDs

State

 

Meaning

 

 

 

Switch 2610 non-PWR Series

 

 

 

Port LEDs

Displays port link information, network activity information, whether the port is

 

configured for full-duplex operation, or the speed of the connection depending on the

 

LED Mode selected. See “LED Mode Select Button and Indicator LEDs” on the next page

 

for more information.

 

 

 

 

 

Mini-GBIC

 

 

 

 

LEDs:

 

 

 

 

Link

Flashing

 

One of the following conditions exist:

 

orange

 

• the mini-GBIC is not supported by the current software

 

 

 

 

• the mini-GBIC is not a genuine ProCurve Mini-GBIC and is not supported

 

 

 

 

• the mini-GBIC is an “A” version in a switch that requires a “B” version

 

 

 

 

or later.

 

 

 

 

Link and Mode

On for 2

 

Both the Link and Mode LED turn on solid for 2 seconds and then go to

(green)

seconds

 

normal operation. This indicates the mini-GBIC has been recognized by the

 

 

 

 

switch.

 

 

 

 

Switch 2610-PWR Series

 

 

 

 

 

 

 

Link

On

 

 

The port is enabled and receiving a link indication from the connected

(green)

 

 

 

device. In PoE mode, indicates that the port is configured to enable PoE

 

 

 

 

power delivery to the connected device.

 

 

 

 

 

 

Off

 

 

One of these condition exists:

 

 

 

 

• no active network cable is connected to the port

 

 

 

 

• the port is not receiving link beat or sufficient light

 

 

 

 

• the port has been disabled through the switch console, the web browser

 

 

 

 

interface, ProCurve Manager, or other network management tool.

 

 

 

 

• In PoE mode, indicates that the port is configured such that PoE power

 

 

 

 

delivery is disabled.

 

 

 

 

 

Flashing1

 

The port has failed self test. The switch Fault, and Self Test LEDs will flash

 

 

 

 

simultaneously.

 

 

 

Mode (green)

Depending on the mode selected, displays the following:

 

•

Connection speed information

 

•

network activity information

 

• PoE power delivery status

 

See “LED Mode Select Button and Indicator LEDs:” below for more information.

 

 

 

1 The flashing behavior is an on/off cycle once every 1.6 seconds, approximately.

1-8